Packet Tracer 1.4.1.2 – Skills Integration Challenge – OSPF (CCNA 4 – Connecting Networks)



Note: This activity and the similar Packet Tracer – Skills Integration Challenge – EIGRP activity are meant as resources for you to determine what skills you may not have yet mastered from the previous courses. Refer to your notes and previous content if you need assistance. But it may be fun initially to see just how much you retained.

Scenario
Your business has just expanded into a different town and needs to expand its presence across the Internet. You are tasked with completing the upgrades to the enterprise network, which includes dual-stacked IPv4 and IPv6, and a variety of addressing and routing technologies.
Requirements
Note: Although not required, adding additional labeling to the topology may help you as you proceed. All names and passwords are case-sensitive.
Basic Device Configuration
• Configure the following on R1 and R4.
– Set the device names to match the Addressing Table.
– Set cisco as the encrypted privileged EXEC mode password.
– Set a banner MOTD which includes the word warn.
– Set the IPv4 and IPv6 addresses according to the Addressing Table.
– Assign the link local address to each interface.
SSH
• Configure SSH on R4.
– Set a domain name of R4.
– Create a user of admin with an encrypted password of cisco.
– Create a 2,048-bit RSA key.
– Configure all vty lines to use SSH and a local login.
DHCPv4
• Configure R4 to act as a DHCP server for its LAN.
– Create a DHCP pool using the name R4.
– Assign the appropriate addressing information to the pool including the 209.165.44.2 as the DNS server.
– Prevent the address used by the router from being distributed to end devices.
NAT
• Configure NAT/PAT on R4 so that all devices on the LAN use the IP address on the Serial 0/0/1 to access the Internet.
– Use a single statement in access list 1 to define the addresses that will participate in NAT. Allow only the 10.10.4.0/24 address space.
– Enable NAT/PAT using the access list.
– Configure the appropriate interfaces as NAT inside or…

source

Part 1 – Complete Network Connection from End User to Internet – Packet Tracer 5.3



Computer network simulation using Packet Tracer 5.3.
You can get this network diagram @Dropbox https://db.tt/XDcN8A7y

Basic example with classful IP addresses given to all nodes. A waste of IPv4 addresses indeed. In real world, classless IP address are chosen.

The network diagram consists of small office/home network, connection to an ISP via Cable Modem, and a server farm (DNS, DHCP, Web, Mail Server). All servers were simulated.
– DNS Server translates domain names to IP addresses,
– DHCP Server distributes IP addresses pool to connected subscribers.
– Web Server serves a website, and
– FTP Server lets you do some file operations.

source

Packet Tracer Lab 4 – Wireless, Connecting to the Internet, Web Servers and DNS



The fourth video in a series that demonstrates how to configure network infrastructure devices using Cisco Packet Tracer. Each video in the series builds upon the previous video, the network evolves step by step introducing important principles and technologies. This video looks at configuring secure wireless connectivity (using WPA2-PSK), configuring access to the Internet using static and default static routes plus configuring the Packet Tracer web server and DNS server.

source

Cisco Packet Tracer – DHCP , DNS and WebServer | Ubuntu



Create a Network Using Cisco Packet Tracer Include DHCP,DNS and WEB Server .

Download (Activity File) http://bit.ly/1two5BO

source

Part 3 – Complete Network Connection from End User to Internet – Packet Tracer 5.3



Computer network simulation using Packet Tracer 5.3.
You can get this network diagram @Dropbox https://db.tt/XDcN8A7y

Basic example with classful IP addresses given to all nodes. A waste of IPv4 addresses indeed. In real world, classless IP address are chosen.

The network diagram consists of small office/home network, connection to an ISP via Cable Modem, and a server farm (DNS, DHCP, Web, Mail Server). All servers were simulated.
– DNS Server translates domain names to IP addresses,
– DHCP Server distributes IP addresses pool to connected subscribers.
– Web Server serves a website, and
– FTP Server lets you do some file operations.

source

CIsco Challenge 2016 Hoop-Fly (no audio)



Download pkt https://1drv.ms/u/s!AlrJF-L25TXrgagIkylLGru15X6rrw
This is an epidemic area.
The cause has been determined to be an insect called HOOP-FLY.
The house ambient temperature is maximum 22° Celsius and the house is full of Hoop-Fly yellow sacks .
Hoop-Fly egg sacks are yellow, but when the house increases the temperature 3ºc (above to 25 °c), it means the Hoop-Fly egg sacks become red.
When the temperature sensor detects an increase of 3ºc (above 25ºc), the Red-Alert and house lights switch on, doors unlock, windows and garage open automatically and the Authorities Central receive an Alert Alarm and an e-mail automatically.
So, when the House Red-Alert turns on, the Authorities’ Office receives an alert e-mail , the NOC checks the home address and immediately dispatch a team to clear the egg sacks.
The authorities’ Office have a remote server to provide monitoring services and remote access to user devices.
Users can control remotely devices from their homes via PC, Laptop, Smartphone and tablets.

ISP – Provider
Provides connection services WAN , WEB, DNS, email and mobile phone to the customers.
It has a cellular/3G tower connected to the ISP through a router.
DNS-Web-Server
Domain: hoopfly. com
WEB: hoopfly. com
E-mail: @ hoopfly. com

ISP-ROUTER
Interface FastEthernet 0/0
IP Address – 2.1.1.1 255.255.255.0
Address Ipv6 – 2001:A::1/64

Interface Serial 0/0/0 – IP address 3.1.1.1 255.255.255.0
ipv6 address 2001:C::1/64
Connected to the Router Phone-Router that provides connection to the network through 3G Mobile
(Fiber) interface – FastEthernet 1 / 0
IP Address 1.1.1.1 255.255.255.0
IPv6 Address 2001:B::1/48 (DHCP)
router rip
ip dhcp pool
ip dhcp excluded-address
ipv6 unicast-routing
ipv6 address FE80::1 link-local
ipv6 dhcp pool ISPv6
Connected to the Cloud-ISP, it provides residential and commercial internet connection for customers.

MOBILE-Router-ISP
Cellular Interface0 Connected to Cell-Tower 3G – DHCP Enabled on the port

CLOUD-PT:…

source

Basic configuration of Router & PC



Basic configuration of Router & PC using Packet tracer. cross cable & straight cable used for connection. also decide broadcast domain. use different network address for each domain. Download details from here :

source

How to monitor all network traffic in real time with Glasswire



▼ Download & Try GlassWire Right Now ▼
http://bit.ly/BarnaGlassWire
^^ Use coupon code ‘nerdgasm’ to get 10% off on the paid version & Follow me on Twitter (@Barnacules) for free code giveaways!

** New Update Available (1.1.41) on 2/4/2016 **
** New Update Available (1.2.64b) on 2/12/16 **
** New Update Available (1.2.70b) on 6/30/16 **
^ – Latest update fixes some resource consumption issues some people were experiencing!

Do you want to know what is really going on behind the curtain on your PC. I show you how to use GlassWire, a software firewall/anti-virus/security application that displays everything going on behind the scenes on your Network and even tells you detailed information on which applications are doing it. You also have the power to pick and chose which applications can and can’t use the internet to give yourself piece of mind.

▼ Enjoy the video? You can support us directly via donation ▼
http://bit.ly/helpbarnacules

▼ Buy Windows 10 – We’re Watching T-Shirt ▼
http://bit.ly/WereWatching
^^ – Use code ‘BarnaVlog for $2 off order

▼ Buy Apple iBuggy T-Shirt ▼
http://bit.ly/iBuggyBlack (Black Shirt)
http://bit.ly/iBuggyBlue (Blue Shirt)
http://bit.ly/iBuggyHeavyMetal (Grey Shirt)
^^ – Use code ‘BarnaVlog for $2 off order

▼ Buy Shut up and take me T-Shirt ▼
http://bit.ly/ShutUpBlack (Black Shirt)
http://bit.ly/ShutUpGreen (Green Shirt)
^^ – Use code ‘BarnaVlog for $2 off order

▼ Discounts & Coupon Codes ▼
GT Omega Chairs @ http://bit.ly/1lA4h4K
-or-
Use code ‘NERDGASM’ at checkout!

▼ Check out my BLOG ▼
http://barnacules.wordpress.com

▼ Questions & Answers ▼
[Q] Is GlassWire Anti-Virus any good?
[A] Actually they have shown that it detects many threats that all other anti-virus software misses mainly because it has access to data those other anti-virus programs do not like the networking history of the application.

[Q] Can this monitor my whole houses network?
[A] Only if it’s running on a router running…

source

snmp server configuration in cisco packe tracer



Learn snmp server configuration in cisco packe tracer.
This tutorial will guide your through the steps to enable SNMP in Cisco Routers.

source

dhcp server configuration, networking tutorial,cisco packet tracer,dhcp server



dhcp server configuration tutorial. how to configure a dhcp server . networking tutorial in easy steps.
if you want more networking tutorial comment and subscribe.

source

1 2 3